L3+ test fixture
LTC chip fixture/LTC test fixture L3+ suitable for Antminer L3, L3+, L3++
LTC Miner Test Fixture L3 + Hash board tester repair chip BM1485 chip. When repairing miners and hash boards, testing fixtures are indispensable. It can quickly locate faulty chips, accurately and efficiently, and greatly reduces inspection time. The principle of the test fixture is to send the test signal to the Hash board. If the chip of the dashboard is damaged, the test signal will stop transmitting on the chip. Through the prompt information on the computer screen, we can quickly find the chip, replace it, and quickly repair the hash board.
Attention please: the test fixtures sent by us by default are not coated with insulating paint. Please do not touch the powering unit with bare hands during the use of this product. Once touched, static electricity will be generated and the CPU will overheat and cannot be used. Apply insulating paint to the powering area, or wear electrostatic gloves before using this product.
Please note: Due to the long time to market for L3+ control boards, there is almost no brand new L3+ control board on the market. Therefore, the control board in our L3+ test fixture is a second-hand one. All L3+ test fixtures will be strictly tested before shipment and the products will be strictly packaged. When you receive the goods, if you find that the pin on the control board is bent, you can try to restore the pin gently.
If the test fixture is damaged due to the following reasons, we do not provide after-sale service:
1. Connect to the network interface of the main control board of the test fixture to cause damage to the test fixture;
2. Change or delete files in SD/ TF card to cause damage to the test fixture.
First of all, thank you for your interest and support to Miners1688. In order to avoid misunderstandings in the process of purchasing a miner, please read all the following notes carefully before placing your order. Thank you very much for your understanding!
1 – Regarding the specific dynamic of the miners market, there is a possibility that the miner’s price has changed when we receive your payment and we might need to refund your order.
We use a batch process for all the miners orders , and that we have each batch at quite limited quantities .The price of different batches of miners is different even though it’s the same model of miner . They are selling pretty fast. Regarding the highly variable and demanded market , the price could be different every day for in stock miners . So there is a possibility that the miner’s price has gone up when we receive your payment and we need to refund you for the order .
2 – About inventory miners
The inventory miner delivery date will be 3-7 working days. Once we receive your order, we will immediately notify our technical center staff to test the machine you have ordered to ensure that it is running well. We will also send you a video for confirmation. We will ship the machine to you only after we make sure that all the performance of the machine is fine. Then, we will deliver the machine to our freight forwarder for shipping. We will update the tracking number on the website and you will receive an email for details.
3 – About preorder miners
The actual delivery date of the pre-order miner depends on the factory’s delivery date of the miner. We will indicate the estimated delivery month of the pre-order miner on the order page so that you can make a consideration. However, there may still be a delay in delivery. For one, if the factory’s delivery date is delayed, then the delivery of the Miners1688 miner will also be delayed. There is also the possibility that the factory will not be able to produce the miner in the expected time, in which case we will process a refund for your order.